Full automatic gypsum wallboard manufacturing facility/gypsum board production line/gypsum board making machine

Full automatic gypsum wallboard manufacturing facility/gypsum board production line/gypsum board making machine

• Annual capacity of gypsum wallboard manufacturing facility:

2 to 30 million sq.m

• Type:

Hot air and hot oil

• Degree of automation:

Fully automatic and semi automatic

• Fuel for the boiler:

Natural gas,coal,desel,heavy oil,light oil etc

• Final product specification:

Common,fireproof,waterproof gypsum board

7 to 15mm in thickness

1800 to 3600mm in length

1200 and 1220mm in width

Paper supply system__________________________________________________________________

• Broken rate of paper
• Degree of automation

• Mainly consists of paper slurry,foaming agent,starch,water and additive etc

• All slurry has the feedback signal of level indication and chain control each batching process according to the process requirement

• This part is mainly the forming of wet gypsum board
• Can be adjusted manually

Cutting system_______________________________________________________________________

• Whole cut control algorithm is achieved by the separate PLC.

Drying room_________________________________________________________________________

• Low heat consumption, heat preservation is good

The application of final product gypsum board:

• Suspended ceiling
• Partition wall

Hot oil pipe

Belt conveyor scale

Machining advantages of gypsum board machine:

• All the raw materials and finishing treatment are certified by our suppliers and must passreceiving inspection before they are released for production;
• Products are precisely machined with high assembling accuracy.

Above loading photos are for your reference:

Service idea:all the customer concern is supposed to be paid close attention, fulfil our trust,

try our best to enter the acme of perfection.

• Factory area:40000sq.m
• Direct manufacturer with 16 years experience till 2015;
• Our company has its own R&D team,then we can continuously provide customers with Full automatic gypsum wallboard manufacturing facility/gypsum board production line/gypsum board making machine technology;
• Has its own installation and debugging team;
• Service tenet:outstanding idea,excellent team, high quality service.

1.Guarantee:

3 years (except the easy worn parts such as bearings, electric buttons).

2.Installation and debugging:

2 to 4 months when the buyer prepare the installation and commission conditions.

3.Technology training:

Provide free training.

4.In order to guarantee the machine running, each year we will send engineer to check

and development the technology with the buyer.

5.If the buyer can not run the machine well then we will send the production engineers to help

the buyer to run the machine, and we can cooperate for long terms.

We want to know________________________________________________________________

1. Do you have gypsum powder?If have,pls give us its test report.
2. How much annual capacity do you interested in?Our offer is based on an assumption that the final product of gypsum board is 9.5mm in thickness.
3. Which type of the fuel for heating?natural gal,coal,diesel,heavy oil or light oil?
4. Method of the drying room?Hot air or hot oil?
5. Pls tell us your land area.
6. Degree of automation of gypsum board production line?