Advanced Concurrent Flow Vertical Grain Drying Machine

Application of Yufeng Rorary Dryer

Yufeng rotary dryer is widely used in a variety of materials drying operations. As reliable operation, convenient operation, strong adaptability, large capacity, it is widely used in metallurgy, building materials, food, light industry, chemical industry, coal, medicine and mining industries. Rotary dryer is suitable for drying granular materials in general. It can also be mixed with some materials by drying sticky paste materials or materials with higher water content. Commonly used in dry sand, slag, coal, animal waste and so on.

Working principles of Yufeng Rotary Dryer

Wet materials are transfered from the belt conveyor or bucket elevator to the hopper, and then by feeder feeding through the feeding device into the terminal. Drum rotary dryer cylinder into a slightly tilted to the horizontal rotating cylinder. Adding material from the higher end, low-end entry by the heat carrier, and the material into a counter-current contact, but also heat carrier and the material together and flow into the cylinder. With the rotating cylinder, the material runs by gravity to a more bottom end. Wet material in the cylinder body to move forward the process, directly or indirectly heating the heat carrier, the wet material to dry, and then the discharge end by the belt conveyor or screw conveyor sent. Tumble dryer wall of the cylinder body with lifting plate, its role is to copy the material up and planted, so that the surface of the material increases the contact with the air flow to improve drying rate and to promote material progress. Heat-carrier is generally divided into hot air, flue gas. After heat-carrier around cylinder dryer back then, generally require cyclone trap the gas inside the material brought down. For further reduction of dust content in exhaust gas should be handled through the bag filter before discharge.

Structure composition of Yufeng Rotary Dryer

It mainly consists of revolution body, raise material board, transmission device, supportive device and sealing ring, etc.
The heat sources of the drier is from the combustion train, and is adopts down-flow heating methods. When the materials enter into the body from the feeding device, it will be pushed back by the spire raising board. As the drier is in an inclined position, the materials will be down to the lower end under the infAdvanced Concurrent Flow Vertical Grain Drying Machinece of gravity and rotation, but the raising board will be threw to the upper end for scattering. This procession makes the material well-distributed in the body, and then ensure the heat exchange with the heat wind. After repeated cycle with this procession, the moisture content will be dried.

Characterstics of Yufeng Rotary Dryer
1. The machine's design is reasonable, have reliable performance, high efficiency, dry and heat uniform, maintenance is convenient.
2. Equipment adopts self-aligning type tug structure, the tug and with good tire-roller, greatly reduces the wear and tear of power consumption.
3. Resistance to overload ability, cylinder smooth operation and high reliability.
4. Drying machine has the characteristics of high temperature resistant, high temperature hot air can be used for a rapid drying of material.
5. Rotary dryer processing capacity, fuel consumption, dry low cost less.

Technical Parameters of Yufeng Rotary Dryer

1. What the rotary dryer can be used for ?

This dryer can dry many kinds of materials which contain moisture, such as coal, coal slurry, slag, industrial waste, and clay stone. They are widely used in building materials, metallurgy, and chemical industry.

2. What is the rotary dryer consist of?

The dryer is formed by rotary body, lifting blade, driving device, supporting device and sealing ring.

3. Can I use the coal or gas as the heating source?

Yes, you can use coal, gas, electricity, oil and wind power to heat the dryer machine.

4. How the rotary dryer to work?

The raw material plate is arranged conveniently to allow adjustable angle positions. The material to be dried is inserted to the rotary cylinder through the raw material plate. Hot air flows within the cylinder causing the separation of water from the material by converting it into vapor which is discharged into the atmosphere. At this point, the material becomes dry.

The Rotary dryer structure characteristics :

1. The internal adopts assembled structure which has improved the accuracy of the equipment and it is easy to transport and install.

2. According to the characteristics of different fertilizers ,we have arranged the second granulation zone reasonably so as to improve the granulation effect .

3. Adopts assembled hoist board so as to exchange heat fully and lower the energy consumption .

4. Temperature induction monitor ,uniform vibration and airproof setting , which improve performance and productivity efficiently .

5. The assorted combustion furnace is a type of energy efficient and has the characteristics of smaller area , easy regulation and equipped with greenhouse.

Advantages of Yufeng Triple-drum Dryer:

1.Triple drum dryer use telescope-feed structure, dry the material quickly.

2.Simple design, self-insulation, improve the heat efficiency to exceed 80%.

3.Structure delicate, stable operation.

4.gooddryingperformance, coal consumption <8kg when drying 1 ton material.

5.The fuel can be coal, oil, natural gas etc, dry mass, granule and powder material.

6.Reduce land area for 50% compared to single drum rotary dryer, so construction investment is saved 50%power consumption saved 60%.

7.Finished product moisture can be adjusted depends on requirement of client.

8.Lower outlet tempreture, loonger dust removal using life.

9.Drive by tug not gear.

10.Finished product tempreture lower than 60°C, packing can be done continuously.

Why choose Yufeng Company

We are manufacturer in Zhengzhou, which serves as the largest base of Chinese industrial technology, and the busiest container port in the world. The competition in this city is severe, only companies with ending technology, stable workforce, and effective cost management could survive. With 25 years of efforts and innovation,our company is now a Advanced Concurrent Flow Vertical Grain Drying Machine brand in China.

Affordable, high-quality machines. Our highly competitive price relies upon our ability to minimize our costs, of which our

competitors don’t.

1. We are factory(NOT Dealer)

2. We own our factory & Land (NOT Rent)

3. Staff reside in factory(Stable Workforce)

Our service:

Pre-sale
Depending on customer's requirement, we insist on "making profit at lowest investment" and gives best solution as per the customer's special demand.
During-sale
1.Manufacturing products strictly on contract while customer constructing.
2.Production progress report each week with detailed description and photos, including with raw materials tables, process and deep process record, testing data sheet, etc.
3.Testing all the equipment by witness of the customer ex-work, delivery, customer acceptance.
After-sale
1.Regularly return visit to the customers.
2.Within 1 year warrant period, we take charge of everything if any quality problems. After the warrant period, we still Advanced Concurrent Flow Vertical Grain Drying Machine on the plant running and services.
3.Response customer's questions within 1 working day, give effective solutions within 3 working days, go into action with 5 working day.

That's our promise, as we know quality and service both more important for long-terms development and cooperation.

ZHENGZHOU YUFENG HEAVY MACHINERY CO., LTD

We can design flowchart and layout according to customers' need.If you want to learn more information,please contact us any time.

Whatsapp/Wechat/Viber 0086 13526817088

....