30-50T/D Soybean pretreat machine and solvent extraction equipment from Dingsheng

Our corporation was established in 2002, mainly engaged in oil engineering R&D, equipment manufacture, installation commissioning and training services.We seize more business opportunities in the competition at any time, to create greater value for you and the society. Our team, which is highly skilled, is ready to serve you in 24 hours.

Low consumption solvent extraction plant equipment

1.high oil yeilding rate,the residual oil:

2.large capacity

3.low energy consumption and labor

Introduction to the oil solvent extraction plant:

1. Adopt stainless steel fixed grid plate and increase the horizontal grid plates, which can prevent the strong miscella from flowing back to the blanking case, so as to ensure good extraction effect;

2. The rotocel extractor is driven by rack, with unique rotor of balanced design, low rotating speed, low power, smooth operation, no noise and quite low maintenance cost;

3. The feeding system can adjust the rotating speed of airlock and main engine according to the feeding quantity and maintain a certain material level, which is beneficial to the micro negative pressure inside the extractor and reduce the solvent leakage.

4. The advanced miscella circulation process is designed to reduce the fresh solvent inputs, reduce the residual oil in meal, improve the miscella concentration and save energy by reducing the evaporation capacity.

5. The high material layer of the extractor helps to form immersion extraction, reduce the meal quality in miscella, improve the quality of crude oil and reduce the evaporation system scaling. 6. Specially suitable for the extraction of various pre-pressed meals.

Daily treatment :

20t,30T,50T,80T,150T,200T,450T,600T,800T.

Main equipment of the oil solvent extraction plant:

extractor system,

toasting system, DT desolvent-toaster ,

evaporation system. steam-stripping equipment, condensing system,

exhaust gas recovery system, and so on.

Features of the oil solvent extraction plant :

1.it is the most simplified structure of the same type if extractor.

2.replaced with a false bottom plate fixed grid, reducing the movement mechanism, high safe operation rate, work reliably.

3.has a " salf-clesning " effect, clean up grid plate without downtime.

4.it can increase the leaching time of the material, reduce meal residual rate.

5.it can increase the loading factor, increase production

Main Process of the solvent extraction plant :

(1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.

(2) Meal is send to toaster. Through the toaster, the solvent in the meal will seperate from the meal. The solvent goes to condenser and is recycled to rotary extraction.

(3) After the mix oil from the rotary extraction enters into first elevator evaporator and second evaporator, most of the solvent in the mix oil is separated.

(4) The mix oil from 2nd evaporator goes to stripping tower,and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.

Warranty period? ------------------------------------------------------------one year

Manufacturing cycle? -------------------------------------------------------30-60 days

Installation time-----------------------------------------depend on customer time

Packing-----------------------------------------------------------------20ft or 40ft Containers

How to solve problem-----------------------------directly contact to salesman

We have different models in accordance with your requirements,if any questions you have,pls contact me freely.