2015 New Condition edible/cooking rapeseed oil pressing machine/oil mills made in china

2015 New Condition edible/cooking rapeseed oil pressing machine made in china

1.WORKING PRINCIPLE:

♦ Transferred by the triangle belt, the electromotor drives the spiral shaft.

♦ The oil plants falls into the first section of the spirals through the feeding part and being carried toward

the end of the machine along with the rotating squeeze spirals.

♦ As the space between the squeeze spirals are getting smaller, the oil plants frictions with each other as

well as the squeeze spirals and the squeeze loops. The pressure in the chest is becoming bigger.

♦ During this process, the oil plants are smashed and big amount of heat is generated, the tissue cells are

destroyed and the oil is separated from the oil plants and flow out from several outlets.

♦ After extracted, the oil plants turns to be cake containing low oil and discharged in thin slices from the end

of the machine. The whole oil and residue separation process is completed.

Under the combined effects of several forces, such as the pressure generated as the space in the squeeze

chest becoming smaller, the propulsion of the revolving spiral axes, the resistance of the multilateral arc curves

on the squeeze loops, the extrusion & friction between the oil plants, oil squeezed from the oil plants comes

out from the squeeze bars and the grooves of the squeeze loops. The residue is conveyed to the end of the

press chest and discharges in thin strips of oil cake from the space between the cake adjuster and the loop for

cake out. Then the whole separation process of oil from oil plants is completed.

2. Product features:

♦ Make oil from seeds and nuts. Oil is for cooking and residue cake is for animal feed or fertilizer.

♦ High working efficiency! Oil press of spiral type just need process the oil plants by one time to get the

maximum oil.

♦ Make high quality healthy oil! Mechanical squeezing craft does not harm the nutrients in the oil. No chemical

substances left.

♦ Cost-Effective! Just need replace the wearing parts. The main machine can run for more than 10 years.

♦ Has different models with different processing capacities, from 50kgs to 800kgs per hour per piece.

3.Purchase flow charts: