Best quality chemical microwave oven/glass fiber microwave drying equipment

Best quality chemical microwave oven/glass fiber microwave drying equipment

Microwave heating dry glass fiber can be according to yarn, blanket, cloth, blankets and other size,

shape and the drying temperature, film forming time and hardness of the water content and so on

different requirements and characteristics of the design.

Glass fiber of microwave drying and conventional drying (such as steam, electric heating, etc.) than the advantages as follows:

1.glass fiber, both inside and outside to water more thoroughly, uniform, enhanced

(silicone) coating and the adhesion strength of the glass fiber surface.

2.deep in the organic combination of silicone and resin composite membrane

components due to their different dielectric properties of the dry layer form has a

time lag, fastening between the organic silicon layer is resin, the interface failure

rate greatly reduced to improve product quality.

3.glass fiber drawing forming, its surface may have a very small crack, because of

the microwave heating, water vapor from the inner to the outer migration, cylinder

lining the existence of large steam pressure to performance, three pump plus from

the glass fiber glass infiltration agent to the glass fiber surface crack penetration,

is more effective than traditional heating drying method, the strength of the glass

fiber is improved.

4.the traditional heating drying time is long, high heat medium temperature glass

fiber under high temperature condition for a long time, to have great infBest quality chemical microwave oven/glass fiber microwave drying equipmentce on

its strength, and microwave drying time is short, less affected the strength of glass

fiber.

5.low moisture content, finished product moisture content is below 2%.

6.the use of microwave drying of glass fiber products appearance color white and

smooth, flexible, low intensity, hydrophobic, easy coloring and spinning and other

characteristics, in similar products have strong market competition force. Used for

drying: package, glass fiber cloth, short cut fiber yarn regiment, cake, ply yarn

regiment, aluminum silicate fiber blanket, ceramic fiber, glass fiber post-processing

drying, curing FRP, etc.

The characteristics of microwave drying tunnel sterilization machine:

1.convenient production, the use of conveyor belt, with multiple table, effective

bearing and transmission, the material inlet feed, drying or directly discharging

mouth discharge after sterilization.

2.USES frequency conversion motor drive, can effectively adjust the appropriate

transport speed according to the craft, the regulation of free delivery speed, in

order to convenient to adjust production

3.stainless steel tunnel design, effectively prevent steam corrosion material,

reduce the contact with the outside world, to ensure the quality of the products.

4.microwave power can be set freely, according to the processing capacity suitable

power, avoid the waste of energy

Packing and shipping

1.Package: wooden cases

2.Delivery detail: In general ,within 30 days

3.Transportation: by vessel

4.Delivery port: FOB Qingdao

Guarantee and after-sales service

For the whole equipment,warranty is 12 months,within 12 months,if have equipmen

t quality problems,we will provide accessories freely. After the expiration of the war

ranty period,if have spare parts problem,we only receive the cost of required replac

ement parts.We commit we will provide free technical support of equipment all who

le life.

Best quality chemical microwave oven/glass fiber microwave drying equipment