palm oil milling equipment manufacturer,edible plam oil machinery

palm oil milling equipment

we have 40tph,10tph etc. plam oil projects,we have more than 30 years experience in the processing of edible oil machinery.

palm oil milling equipment flowchart:

FFB reception station→ Sterilization station → Threshing station → Digesting station→Pressing station

↓

Nut drying← Kernel crushing ← Kernel&Fiber separation ←Crushing ←Palm cake

↓

Nut oil pressing →Filteration→Crude palm kernel oil

palm oil milling equipment introduction:

palm oil milling equipment main parts:

Pretreatment and oil press:

a. Palm fruit reception:Transport FFB to reception station, flow to the scraper conveyer, conveyed to sterilizing station.

b. Sterilizaiton: FFB transported by scraper conveyer fall into sterilizing tank, make FFB soft,get more oil yield. sterilizing time 90~120mins, temperature 130~145°C

c.Threshing: After sterilizing, fruit bunch transported to thresh machine, separate palm fruit and empty fruit bunch.

d:Digesting: Before press palm fruit, should be crushed separated pulp and kernel

e.Oil press: After crushing and digesting, the maxture of palm fruit and kernel fall into special palm oil presser

f.Clarification:Filter the oil and use centrifuge to separate oil and impurities.

g. Kernel recovery:After press, the kernel and cake will be transported to kernel recovery station. Separating nut and shell, then go to kernel oil press.

h.Palm kernel oil filteration: Use vibrating filter to filter the oil to remove impurities in it.

picture of palm oil milling equipment :