HSM Manufacture ISO CE hydraulic press used punch tool

HSM Manufacture ISO CE hydraulic press used punch tool

Quick info Of hydraulic press used punch tool

1. It can save labour and save cost : only 1 or 2 people can finish the production.

2. Widely used to press various kinds of oil materials, like soybean, sunflower seeds,

peanut, sesame,rapeseeds, flax seed, camellia, cotton seed, cashew, hemp seed, linseeds, coconut,and all the oil content crops.

3. Different oil materials have different oil yielding.

4. Small-land using: only 10-20square maters can meet the need of production.

5. The oil left in cake is less than 6% . And cake thickness can be adjusted once the machine stop running.

6.easy to operate . When operating, you should do as the instruction .

hydraulic press used punch tool Raw Material:

Working Principle of hydraulic press used punch tool

1.When oil press is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.

2.Under high temperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.

3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.

4.hydraulic press used punch tool when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well.

5.Meanwhile, particles adjacent the screw will rotate along with screw’s rotating, causing every particle inside the chamber to possess different speed.

Technical Parameter Of hydraulic press used punch tool:

Payment Terms: We usually accept T/T, L/C, Western Union etc.

20-30% in advance as down payment, the balance pay before delivery. We take pictures and testing videos of finished products before you pay the balance.

Packing:

1.Sand blasting, coat with high quality paint.

2.rustproof and moisture proof before delivery.

3.Load container, Spear Parts in wooden case or iron sheet trunk.

hydraulic press used punch tool Shipping:

1.By sea or by train. we have 20 years cooperate transport company. bestfreight, fast delivery.

2.Send B/L in 3-5 days after ship leaving.

3.will remind you before ship arrival.

1.Design most suitbale flow chart and layout freely according to your request.

2.Provide operating instruction and relative drawing.

3.We can send 1-2 technicians to the site for guiding the installation and commissioning.

4.We offer training service for free.

5.We offer the components with favorable price.

6.lifetime Warranty. hydraulic press used punch tool

...