50-200TPD soybean / sunflower / peanut oil extraction machine

50-200TPD soybean / sunflower / peanut oil extraction machine

Soybean oil pretreatment workshops

1) Weighing: The Raw-stuff, Soybean is firstly stored in Buffer Tank which is for adjusting the Soybean flow. By means of Weighter the processed Soybean is weighted and the imputing quantity is accumulated.
2) leaning and Impurities separating: By means of Vibrating Sieve the larger and smaller size impurities in Soybean are removed out.
3) Gravity De-stoner & Magnetic Separating: some impurities which are as almost same size as Soybean are still mixed in Soybean, but as their gravity or nature properties are different, by means of Gravity De-stoner and Magnetic Separator , the heavy stone and ferric impurities are separated out from Soybean.
4) Crushing & De-hulling: In order to increase protein content in Soya Meal, the de-hulling process is very significant. De-hulling system is composed of Cracking by two Crushing Mill which breaks Soybean into small pieces, and twice separating by Aspirators which separates Soy Hull out from Soya Meal.
5) Flaking: Flaking Machine is adopted for flaking Soya Meat into thin Flake, during which Soybean cell tissue is destroyed.
6) Expanding: The Soya Flake is fed into Expander in which heat is produced with the functions of kneading, friction between the spiral shaft and inner wall of the Expander, meanwhile eject in steam to increase Soya Flake temperature.
7) Drying & Cooling: Jetting out from the end of expander, the Soya Cake is very moist and hot , it should be dried at moisture content 9.5% or so, and cooled down to about 60℃ by counter-current-wise down in Cooling Dryer, and then the dried Soya Cake is conveyed into Extraction workshop.

Soybean oil extraction workshop

1) Oil Extraction system: for extracting oil from Expanded Soya Cake to get Miscella which is mixture of Oil and Hexane;
Wet Meal Desolventizing System: for removing Solvent from Wet Meal as well as to toast and dry Soya Meal for getting proper finished Meal Product qualified for animal feed;
2) Miscella Evaporation System: for evaporating and separating Hexane out from Miscella under negative pressure;
3) Oil Stripping System: for thoroughly removing residual Solvent to produce standard Crude Oil;
Solvent Condensing System: for recovering and circulating use of Hexane;
4) Paraffin Oil Recovering System: further recovering residual Hexane gas remains in vent air by means of Paraffin Oil to reduce Solvent consumption;

Soybean oil refining workshop

1) Hydrating & Degumming: The Crude Oil firstly is filtered by Filters for removing out mechanical impurities out from, and then has heat-exchange in Heat Exchanger with hot Refined Oil, next is heated by Heater to the appropriate temperature. After being mixed with hot water by Mixer , it is pumped into Hydrating Reactor in which most phospholipids will be hydrated into flocculent Lecithin Gum.
2) Neutralizing & Degumming: Adding in appropriate Lye by Dosing Pump and mixing them by Mixer , the oil is pumped into Neutralizing Reactor in the hydratable phospholipids as well as acid are saponified into Soapstock Gum.
3) Washing: There are residual soapstock still remains in degummed and neutralized oil. Adding Hot Water and mixing with oil by Mixer, the residual soapstock will be solved completely into washing water.
4) Bleaching. The Degummed Oil firstly heat-exchange in Heat Exchanger with hot Refined Oil, next is heated by Heater up to 110℃. And then enters into Oil-Clay Mixer in which it is mixed with Bleaching Clay. next the mixture of oil-clay enters into Bleaching Tower in which the most pigment in oil will be adsorbed by Bleaching Clay.
5) Deacidifying & Deodorizing: The Bleached Oil contains some odouring substance which mostly are free fatty acids. By means of Assorted De-acidifying & Deodorizing Tower, under high temperature and 50-200TPD soybean / sunflower / peanut oil extraction machine condition, these free fatty acids will be stripped out from oil. The odouring substances are caught in Fatty Acid Scrubber and collected in Fatty Acid Tank .

Packaging

Packaging:all machines covered by plastic film firstly and then packed in wooden case to best protect the machine during long time transportation.

shipping

Shipping: All machines will be sent by sea, if you need other kind of transportation, please inform us in advance. And all machines would be shipped in 7 days after the receipt of payment. Before and after shipping, we will take photos of machines and send photos to client.

Our service

1. One year quality warranty for the machine and spare parts

2. Overseas engineers service for installation

3. Whole-life after-sales service and free consultation

4. Customized requirements available

5. Technician guide at the site.

6. 24Hr online service

1.About us

Henan Institute Of Grain Machinery Manufacturing Co., Ltd. is established driven by the academy of Henan University of Technology. As a large joint-stock enterprise integrating technology, manufacture and sales, our company is specializing in the production of grain and oil machinery, agricultural and sideline machinery. Cooperating with Henan Mechanical Design and Research Institute and Henna University of Technology (Former Zhengzhou Grain College), Henan Institute Of Grain Machinery Manufacturing Co., Ltd. has carried out the research and application of oil machinery, food machinery, grain machinery, construction machinery, and feed machinery, etc.

we provide a turnkey project of our machinery,including special design,installation, commissioning and training workers.

2.Why choose us

---Advanced equipments,good quality

---Professional skills,all-related services

---High quality and efficiency technology

---Complete production line,quick delivery

---The biggest grain and oil machine manufacturer and exporter in China

---Exporting to more than 30 countries and regions

FAQ

1.Q :Are you the factory?

A:Yes, We are a professional manufacturer for several years.

2.Q: Where is your factory located?

A:Our factory is located in 50-200TPD soybean / sunflower / peanut oil extraction machine, Henan Province.

3.Q:How about the INSTALLATION?

A:Engineers available to service machinery overseas,including installation,commission and training,etc.

4.Q:Can your company accept the customized product?

A:Yes,OEM &ODM service is available.We can make the products according to your size,design,color, It will be better if you can send us the product pictures for our reference.

5.Q: How does your factory do regarding quality control?
A: Quality is priority. We always attach great importance to quality control from the very beginning to the end of the production. Every product will be fully assembled and carefully tested before it's packed for shipment.

Any questions, please don't hesitate to contact us!