Building material drywall/gypsum board/plasterboard making machine

Building material drywall/gypsum board/plasterboard making machine

The finished product is gypsum board:_________________________________________

The purpose of gypsum board:____________________________________________________

Perforated gypsum board
PVC laminated gypsum board
Partition wall
Suspended ceiling

• Annual capacity of GYPSUM BOARD PRODUCTION MACHINE:

2 to 30 million sq.m

• Type:

Hot air and hot oil

• Degree of automation:

Fully automatic and semi automatic

• Fuel for the boiler:

Natural gas,coal,desel,heavy oil,light oil etc

• Final product specification:

Common,fireproof,waterproof gypsum board

7 to 15mm in thickness

1800 to 3600mm in length

1200 and 1220mm in width

Paper supply system__________________________________________________________________

• Broken rate of paper
• Degree of automation

• Mainly consists of paper slurry,foaming agent,starch,water and additive etc

• All slurry has the feedback signal of level indication and chain control each batching process according to the process requirement

• This part is mainly the forming of wet gypsum board
• Can be adjusted manually

Cutting system_______________________________________________________________________

• Whole cut control algorithm is achieved by the separate PLC.

Drying room_________________________________________________________________________

• Low heat consumption, heat preservation is good

Hot oil pipe

Belt conveyor scale

Machining advantages of gypsum board production line:

• All the raw materials and finishing treatment are certified by our suppliers and must passreceiving inspection before they are released for production;
• Products are precisely machined with high assembling accuracy.

Above loading photos are for your reference:

• Factory area:40000sq.m
• Direct manufacturer with 16 years experience till 2015;
• Our company has its own R&D team,then we can continuously provide customers with Building material drywall/gypsum board/plasterboard making machine technology;
• Has its own installation and debugging team;
• Service tenet:outstanding idea,excellent team, high quality service.

1.Guarantee:

3 years (except the easy worn parts such as bearings, electric buttons).

2.Installation and debugging:

2 to 4 months when the buyer prepare the installation and commission conditions.

3.Technology training:

Provide free training.

4.In order to guarantee the machine running, each year we will send engineer to check

and development the technology with the buyer.

5.If the buyer can not run the machine well then we will send the production engineers to help

the buyer to run the machine, and we can cooperate for long terms.

We want to know________________________________________________________________

1. Do you have gypsum powder?If have,pls give us its test report.
2. How much annual capacity do you interested in?Our offer is based on an assumption that the final product of gypsum board is 9.5mm in thickness.
3. Which type of the fuel for heating?natural gal,coal,diesel,heavy oil or light oil?
4. Method of the drying room?Hot air or hot oil?
5. Pls tell us your land area.
6. Degree of automation of plasterboard production line?

Our company advantage:

• Direct manufacturer,16 years.
• Control quality strictly.
• Professonal team of installation and debugging.
• Lower price than trading company.

Our product advantage:

• Quality guarantee for all the raw materials.
• More energy saving.
• Reliable and easy to maintain.
• Strong technology supporting.