Fish Farming Using Floating Fish Food Pelletizing Machine/equipment

Fish Farming Using Floating Fish Food Pelletizing Machine/equipment

Descriptions:

This pellet mill is our matured, flat die biomass equipment, it is driven by gear box, which can not only extrude biomass, sawdust pellet from straw, bamboo powder, rice hull, all kinds of wood, but also can get feed-stuff pellets from corn, oil cake the fish, chicken, animal and so on.

According to customers' requirement, many kinds of pellets can be manufactured via different models of pore diameter, and feed pellets for livestock will be produced through both different compression ratios and raw material properties.

Specifications:

About the machine:

Q1. Does this machine can make wood pellets?
Answer: This machine can not make wood pellets. It is only can be used to make feed pellets for poultry. If you want to make wood pellets, you need bigger models.

Q2. What is the spare parts for this small floating fish fish pellet mixer?
Answer: The spare parts for this machine are one die and two rollers.

Q3. How often should I change the spare parts?
Answer: The longlife time of the die and rollers is 1500 hours at least. It needs to change the easy weared parts every five months. If maintained and used well, the parts can be used about EIGHT months or more.

Q4. How often would the machine need to be serviced?
Answer: Every three months is the best for the machine.

Q5. Does the raw materials require any additives to aid in the forming of the pellets?
Answers: It doesn't need to add any additives to aid in the forming of pellets. The only thing you need to do is to control the moisture of the raw materials properly.

Q6. What's the warrantee time?
Answer: One year for main machine, except the spare parts.

Problem investigation and trouble shooting:

Q1. I want to make feed pellet for chicken, what's the proper diameter of the pellets?
Answer: Diameter of pellets and application(for your reference):

Q2: The machine works well, but it can not make pellets, it is hard to form pellets. What can I do?
Answer: If the moisture is too high or too low, it is hard to form pellets. It would be better if the moisture is between 13-25%, and the moisture depends on the raw materials. Different raw materials, different moisture.

Q3. The capacity becomes smaller after a period of time use, why?

Answer: Probably because the gap between die and rollers is too big. Please decrease the gap between die and rollers. Or it is because the moisture of raw materials is too low. Add some water to increase water content.

Q4. The machine stops suddenly during working.
Answer: There must be a big, hard foreign object or metal enter the machine, please cut off the power and get the object or metal out of machine.