High efficient soybean machine and soybean oil processing equipment

Leaching oil is the world's advanced oil technology. Since its inception in 1870, after more than 100 years of history, its technology has been improved and improved, so far, has become the world's oil industry, the main way to produce walnut,mustard,protable,peppermint,blackseed oil.

a.direct leaching, b.pre-press leaching

The use of walnut,mustard,protable,peppermint,blackseed oil extraction machine to dissolve the oil, through the wetting penetration, molecular diffusion and convective diffusion of the role of the embryo in the oil extracted from the method.

The leaching process of French oil generally includes pretreatment, oil leaching, wet meal desolvation, mixed oil evaporation and stripping, solvent recovery and other processes.

Oil residue of meal: ≤ 1.0%

Moisture of meal: 12% (adjustable)

Solvent residue of sunflower meal: ≤ 500PPM

Total volatiles matter of crude oil: ≤ 0.2%

Residual solvent of crude oil: ≤ 100PPM

The process of soybean machine :

The oil extraction machine contains wet meal that from the extractor are sent to the DTDC desolventizer’s pre-desolventizing layer by scraper through air locker, the bottom is heated by indirect steam to remove part of solvent; then the pre-desolventized wet meal get into the desolventizing layer, there are automatic control on the desolventizing layer to keep certain thickness of materials, then the bottom gets into the direct steam to remove all the solvent, at same time some steam condense in the meal, the moisture content of meal will sectional rise.

The desolventized meal falls onto the drying layer quantitative through rotary valve, the drying layer keeps certain materials level, then process the drying procedure, after drying get into the cooling layer to lower down the temperature, finally discharge the finished meal through automatic flow controlling gate, then though the scraper to transport the meal to warehouse.

The main parts of soybean machine :

(1) Solvent pumps: continuously spray solvent to the rotary-type extractor.

(2).Rotary extractor: Spray and soak the prepressed cake with solvent so that oil fats can be dissolved in solvent(form miscella). After processing,you can get wet meal and miscella (mixed oil).

(3). DTDC: usd to separate the solvent from the wet meal.

(4). Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st,and then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline wter, at last the reactant precipitate, reaching the goal of purifying.(5). Miscella tank 2nd: the purified miscella will be pumped into it.

(6). Miscella stripping: it will remove the remaining solvent in miscella. And thesolvent will be discharged to condenser for recycling.

(7). condensers:used to cooling the solvent gas separated from the wet meal and miscella for recycling.

1) The material is divided into several independent units on the material bed, which can effectively prevent miscella at all levels from fleeing hither and thither on the material layer and ensure the concentration gradient between several sprays.

2) Immersion area appears in each lattice, which can help achieve better immersion effect.

3) The chain box is supported by track and can prolong the service life of screen deck by not touching it.

4) The towline extractor is driven by world High efficient soybean machine and soybean oil processing equipment double-shaft hydraulic motor, with balance force, reliable operation and less maintenance cost.

5) Specialty suitable for the extraction of high oil and high power materials, and better immersion effect can be expected for ordinary oil plants.

walnut,mustard,protable,peppermint,blackseed oil extraction machine

Main Economic and Technical Parameters of Towline Extractor (take 500T/D as an example):

200TPD soybean equipment :

2500 TPD soybean processing equipment :

If you have interest in our machine, please kindly send us your inquiry details in the Below , Click Now!