palm oil making machine

palm oil making machine

Palm oil mill process is quite different from other oil seeds processing, such as the soybean , peanut etc. Palm fruits consists a lot of fatty acid enzyme, which would hydrolyze palm oil. That's the reason why palm fruit must be sent into processing in 24 hours.

Palm oil mill process includes 6 parts:

Palm bunches receiving, sterilizer, threshing, mashing and pressing, crude oil clarifying and palm kernel recovery.

Part 1. Palm oil mill process of fruits receiving:

Collecting the ripe fresh cluster from the orchard and convey by trucks,

then pour the fluster into the discharge door after weighed by ground weight .

(The discharge door has discharging channels, the upper and lower switches of the iron gate are controlled by pneumatic, Pneumatic control system consists of air compressor and pneumatic control devices. Start the control valve to open the gate of the discharge door, then the palm fruits will fall into the fruit basket car or conveyor. )

Palm oil mill process of fruit receiving

Part 2. Palm oil mill process of sterilizer:

Fresh palm fruit bunch are airtight sterilized in sterilizer, injecting direct steam (the pressure is 300KPa) to heat 60mins. The purpose is to prevent enzymes broken down, avoiding FFA content in oil further increase.

Palm oil sterilizer

Part 3. Palm oil mill process of threshing:

The purpose of threshing is to separate the palm fruit from the FFB.

The drum type thresher is the usual machine to separate the fruit.

The separated oil palm fruit is sent into the pressing section.

Empty fruit bunch be ejected to the yard from the other side of the revolving drum, or shipped out from the plant as palm orchards slipcover to recycling use, or burning in the locale as fertilizer for agricultural land.

Palm oil mill threshing

Part 4. Palm oil mill process of mashing and pressing:

There is also the steam heater in masher.

The purpose of mashing is to separate the pulp and nut and crush the palm pulp.

At the same time, the steam is used to cook the palm fruit and broke the cell of pulp.

Because of cooking, sterilizing, threshing and mashing made the pulp soft and damage pulp cell structure, the palm pulp becomes soft and cell is broken.

Then it is sent to continuous screw press.

After pressing, oil palm fruit is divided into two parts:

the mixture of oil,

water and solid impurities,

and the press cake (fiber and nut)

Palm oil mill pressing

Part 5.Palm oil mill process of oil clarifying:

Machine-pressed crude oil first diluted with water washing, through settlement and filtration, the fiber material removed from the oil, and then carry out continuous settlement,

the whole divided into two parts: oil and sediment.

A. Oil by centrifugal separation and through palm oil making machine drying pumped into the storage tank for storing;

B. oil sediment by filtration and dirt oil separation, oil process second settlement, dirt oil mixture process clarification separation, Skim oil then carry out a second settlement, sewage pumps to sewage treatment pond for dealing with.

Palm oil mill clarifying

Part 6. Palm oil mill process of palm kernel recovery:

Press cake broken by breaking screw conveyor and then transported into the fiber separation air net and fiber polishing roller for fiber separating.

The separated fiber material is sent to the boiler room as fuel;

the separated stone is transported to stone warehouse by pneumatic conveying system for temporary storage.

The end products

1.Payment terms: 30%T/T deposit in advance, the balance 70% shall be paid before delivery;

2.Package: The whole machine will be packed in Containers;

3.Delivery time: 40-60 working Days since the date of receiving deposit;

4.Installation&after- selling service: we will appoint 2-3 engineers to your(the buyer) country to conduct the installation. It contain the installation, commissioning and debugging until the machine running smoothly. Our engineers will also free training your workers to operate the machine;

5.Buyer should pay all the visa charge, round-trip air ticket charge, board and loading, and sapalm oil making machine USD100 per engineer per day;

6.Warranty period: one year. In the warranty period, all because of the quality of products has caused the damage or failure of equipment, suppliers will take the responsibility for the free repair and replacing spare parts. After this period, also will offer support to our customer, such as technology conduct, consult and repair service and so on.

1. More than 60 years ` experiences in edible oil processing plant

2. the maize products

5-500tpd soybean pretreatment , extraction and refinery

5-500tpd rice bran expanding and extraction

5-500tpd rapeseed processing plant

5-500tpd cottonseed processing plant

5-500tpd peanut processing plant

5-500tpd palm processing plant

5-500tpd sunflower seed processing plant

3.The main market

Africa: Egypt , Sudan , Burkina Faso ,

Asia :

1) Tajikistan , Kazakhstan, Russia . Uzbekistan

2)Bangladesh , Malaysia , Indonesia , Myanmar Pakistan,

Henan Huatai Cereal and Oils Oil Machinery Co., Ltd. (short for HHFOME) is a manufacturing enterprise specialized in producing oil machinery in China.

HHFOME consists of Henan Huaxian Grain Machine Factory, Huaxian Hangpeng Grain Machinery Co., Ltd. and Beijing Huakang Xiwang Biological Technology Co., Ltd..

Established in 1988, HHFOME covers an area of 63,000 square meters and has 210 senior engineering technicians. Our company has 202 sets of automatic processing equipment. Processing capacity of our enterprise is more than 3000 sets every year.

HHFOME has obtained independent export rights and has passed the evaluation of ISO9001:2000 Quality System Management Certification. We have got 22 national patents, 4 international awards, 2 national awards and 2 provincial awards. Our products include copra oil pressing equipment, rice bran oil manufacturing equipment, lignite wax extraction equipment, cottonseed preprocessing equipment and other machinery of oil making field, with 5 series and over 80 kinds.